12
Data Sheet PU10542EJ02V0DS
NE55410GR
RECOMMENDED SOLDERING CONDITIONS
This product should
be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature (package surface temperature)
: 260?C or below
Time at peak temperature
: 10 seconds or less
Time at temperature of 220?C or higher
: 60 seconds or less
Preheating time at 120 to 180?C
: 120?30 seconds
Maximum number of reflow processes
: 3 times
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
IR260
Wave Soldering
Peak temperature (molten solder temperature)
: 260?C or below
Time at peak temperature
: 10 seconds or less
Preheating temperature (package surface temperature)
: 120?C or below
Maximum number of flow processes
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
WS260
Partial Heating
Peak temperature (terminal temperature)
: 350?C or below
Soldering time (per side of device)
: 3 seconds or less
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
HS350
Caution
Do not use different soldering methods together (except for partial heating).